elektraLite Moving Yoke 120v Spot - Manual (Page 2)

- １ - MY575 SPOT
For your own safety, please read this user manual carefully before installing MY575.
Every person involved with the installation, operation and maintenance of MY575 has to:
-be qualified
-follow carefully the instructions of this manual
Introduction :
Thank you for choosing MY575.
When you unpack MY575, there should be in the box the fixture, a power cable, a DMX
XLR cable, a safety cable and a CD. Please check carefully that there is no damage caused in shipping. If you
notice any damage then immediately let your shipper know and the dealer from whom you purchased MY575.
Features:
operation mode is by DMX 512 utilizing (18 channels) or stand alone or sound activation.
pan and tilt movement :
8 bit and 16 bit resolution for smooth and precise motion
pan : 630° rotation / tilt : 265° rotation
speed of pan/tilt movement adjustable
electronic focus
strobe/shutter : high speed dual-blade shutter, 0-15Hz or random strobe
dimmer : mechanical adjustable from 0% to 100%
colors : 2 color wheels
color wheel 1 has 7 dichroic filters plus white, with rainbow effect
color wheel 2: 4 dichroic filters plus white, 2 temperature correction color filters,
1 UV filter, with color cycle or rainbow effect
gobos : 2 rotating gobo wheels, each wheel with 6 adjustable rotating gobos plus open, both wheel with gobo
shake and gobo indexing
prism: 3- facet speed adjustable prism rotates in two directions with 16 prism macro effect
auto-program: 8 preprograms can be selected
display: can be inverted (180)° when MY575 is hung upside down.
local or remote resetting
lamp switches ON/OFF locally or remote, motor reset
auto test for all functions
value of each DMX-channel can be displayed
editable program:
edit and save a program to the on board processor using either the controls on the front panel or using an
external controller like an Elektralite CP-20. A maximum 48 scenes/cues/looks can be saved on board. The
resultant saved program can be played back from the “run” menu accessed from the front display panel