elektraLite Moving Yoke 120v Spot - Manual (Page 11)

- １０ - MY575 SPOT
- Main menu 1
1. Press [ENTER] for 3 seconds to enter the main menu (display flashing).
2. Press [UP] to select “LAMP”.
- Lamp on/off
With this function you can switch the lamp on or off via the Display Panel.
1.
Select "OPEN" by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to switch on the lamp or “OFF” if you wish to switch off the
lamp.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] in order to return to the main menu.
- Lamp on/off via external controller
With this function you can switch the lamp on or off via an external controller.
1.
Select “ONLI” by pressing [UP] button.
2. Press [ENTER], the display shows “ON” or “OFF”.
3. Press [UP] to select “ON” if you wish to enable this function or “OFF” if you don’t.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.
- Delay lamp on
With this function you can delay the lamp ignition.
1.
Select "DELA" by pressing [UP] button.
2. Press [ENTER] to confirm; the display shows “D-00”. In this setting, the lamp will be ignited
immediately.
3. Press [UP] to select the desired delay between "00" and "59" minutes. If you select “D-03” the lamp
will be ignited after 3 minutes.
4. Press [ENTER] to confirm.
5. Press [EXIT/DN] to return to the main menu.