ROTHENBERGER ROSCOPE i2000 - Manual (Page 38)

ENGLISH 36
Step 3
Do not press the power button when the “hour glass“ is
on the screen!
The firmware is updating (45 seconds).
Step 4
Firmware updated successfully, OK to turn power off and remove SD card.
11. Cleaning Instruction
1. Alcohol wipes or mild detergent and water to remove dirt and grease from the product.
2. Recommend soft optical cloth for cleaning the LCD window.
3. Recommend cotton cloth for cleaning imager head.
4. Allow appropriate drying time before operating handheld device.
12. Storage
1. It is good practice to clean the unit prior to long term storage.
2. It is best to store the unit in a cool dry location.
13. Troubleshooting
Symptom Possible Reason Solution
Display unit does not turn on Battery is discharged Recharge battery
Faulty electronics Contact ROTHENBERGER
Service Center
Display turns on, but does not
show image Loose cable connection Check cable connections
Imager head covered by
debris Clean imager head
Display shows an
unresponsive image Image processor encounteres
an error Turn OFF unit/turn ON to
reset processor
Battery does not hold a
charge Battery may have discharged
slightly during storage Recharge battery
Run time dependent on LED
usage Recharge battery more often
when extensive use of LEDs
Battery may be damaged Contact service center and
replace battery
Life cycles of battery may
have expired Contact service center and
replace battery