Nikon D5100 - Manual (Page 179)

161
L
Choose how long the camera will remain before cancelling the
currently selected remote control release mode and restoring
the previously selected release mode (
0 37). Choose shorter
times for longer battery life.
Choose the pitch (High or Low) of the beep that sounds when the camera focuses
using single-servo AF (AF-S or when single-servo AF is selected for AF-A;
0 39), when
focus locks in live view, while the release timer is counting down in self-timer and
delayed remote release modes (
0 37), and when a photograph is taken in quick-
response remote mode ( 0 37). Select Off to prevent the beep from sounding. Note
that a beep will not sound in quiet-shutter release mode (mode J; 0 35).
The current setting is shown in the information display: 3 is
displayed when the beep is on, 2 when it is off.
Select On to display ISO sensitivity in the viewfinder in place of
the number of exposures remaining.
c4: Remote on Duration
G button
➜ A Custom Settings menu
d: Shooting/Display
d1: Beep G button
➜ A Custom Settings menu
d2: ISO Display G button
➜ A Custom Settings menu