Bracketing – Nikon D5100 User Manual
Page 106
88
t
Bracketing
Bracketing automatically varies exposure, white balance, or Active D-Lighting (ADL)
slightly with each shot, “bracketing” the current value. Choose in situations in which
it is difficult to set exposure, white balance, or Active D-Lighting and there is not time
to check results and adjust settings with each shot, or to experiment with different
settings for the same subject.
1
Choose a bracketing option.
After pressing
G to display the menus,
highlight Custom Setting e2 (Auto
bracketing set) and press
2.
The options shown at right will be displayed.
Highlight the desired bracketing type and
press
J.
2
Place the cursor in the information display.
If shooting information is not displayed in the monitor, press the
P button.
Press the
P button again to place the cursor in the information display.
Option
Description
k
AE
bracketing
Vary exposure over a series of three photographs.
Shot 1: unmodified
Shot 2: exposure reduced
Shot 3: exposure increased
m
WB
bracketing
Each time the shutter is released, the camera creates three images, each with a
different white balance. Not available with image qualities of NEF (RAW).
!
ADL
bracketing
Take one photo with Active D-Lighting off, and another at the current Active
D-Lighting setting.
Information display
P button
G button