F 14 – Nikon P330 User Manual
Page 236
F14
Troubleshooting
Tec
h
nica
l N
otes and
Ind
e
x
GPS
Problem
Cause/Solution
A
Unable to identify
the location or it
takes time to
identify the
location.
• The camera may not be able to identify the location in some
shooting environments. To use the GPS feature, use the
camera as much as possible in an open-air area.
• When positioning for the first time, when positioning was
unable to be performed for about two hours, or after the
battery was changed, it takes a few minutes to obtain the
positioning information.
Unable to record
position
information on
shot images.
When signals are not received from the satellites and positioning
cannot be performed, the position information is not recorded.
Before shooting pictures, check the GPS reception indicator.
Difference
between the
actual shooting
location and
recorded position
information.
The acquired position information may deviate in some shooting
environments. When there is a significant difference in the
signals from the GPS satellites, there could be a deviation of up to
several hundred meters.
An incorrect
location name is
recorded or the
correct location
name is not
displayed.
The desired landmark name may not be registered or an
incorrect landmark name may be displayed.
–
Unable to update
the A-GPS file.
• Check the following items.
- Whether the memory card is inserted
- Whether the A-GPS file is stored on the memory card
- Whether the A-GPS file saved on the memory card is more
recent than the A-GPS file saved in the camera
- Whether the A-GPS file is still valid
• The A-GPS file may be corrupted. Download the file from the
website once more.
–
Unable to select
Create log in the
GPS options menu.
Clock not set. Set date and time.
Unable to select
Start log.
• Record GPS data in GPS options of the GPS options
menu is set to Off.
• Recording log data. Select End log and finish log
recording to start a new log.
Unable to save log
data.
• Be sure that a memory card is inserted in the camera.
• Up to 36 log data events can be recorded in a day.
• Up to 100 log data events can be stored on a single memory
card. Delete log data that is no longer required from a memory
card or replace the memory card with a new one.
–
–
E67