Nikon P330 - Manual (Page 140)

E16
Editing Still Images
Re
fe
re
nce
S
e
ct
io
n
2
Set the RAW (NRW) processing parameters.
• Apply the settings below while checking the image
and rotating the zoom control toward g (i). Rotate
toward g (i) again to return to the setting screen.
- White balance: Adjust the white balance setting
( E32).
- Exp. +/-: Adjust the brightness.
- Picture Control: Change the settings for finish of the image ( E27).
- Image quality: Set the image quality to Fine or Normal ( A69).
- Image size: Choose an image size ( A71). The image is cropped if I 3984×2656,
u 3968×2232, O 1920×1080 or H 3000×3000 is selected.
- D-Lighting: Enhance brightness and contrast in dark portions of pictures (
E12).
• Press the l button to change back to the default settings.
• Choose EXE when all settings have been adjusted.
3
Choose Yes and press the
k button.
• A RAW (NRW) processed JPEG image is created.
B
Notes on RAW (NRW) Processing
• The COOLPIX P330 can only create JPEG-format copies of RAW (NRW) images taken with the
COOLPIX P330.
• RAW (NRW) processing > White balance > Preset manual cannot be selected for photographs
taken at a White balance setting other than Preset manual.
• The setting for Noise reduction filter ( E48) that was set for shooting a picture is applied to the
JPEG images to be created.
C
More Information
See “Printing Images of Size 1:1” ( A73) for more information.
Check Reset
RAW (NRW) processing
EXE
No
Yes
settings?
Create a JPEG copy at these