Nikon D800 - Manual (Page 364)

En_03
340
U
View the current camera firmware version.
D
Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected. If a
warning is displayed in the monitor (
0 420), turn the camera off and
remove the card.
See the manual provided with the Eye-Fi card, and direct any inquiries
to the manufacturer. The camera can be used to turn Eye-Fi cards on
and off, but may not support other Eye-Fi functions.
A
Supported Eye-Fi Cards
As of September 2011, the camera supports 8 GB SDHC Pro X2 Eye-Fi
cards. Some cards may not be available in some countries or regions;
consult the manufacturer for more information. Eye-Fi cards are for use
only in the country of purchase. Be sure the Eye-Fi card firmware has
been updated to the latest version.
A
Using Eye-Fi Cards in Ad Hoc Mode
Additional time may be required when connecting using Eye-Fi cards
that support ad hoc mode, such as the Eye-Fi Pro X2 SDHC 8 GB. Set
Custom Setting c2 (Auto meter-off delay,
0 291) to 30 s or longer.
Firmware Version
G button ➜ B setup menu