Nikon D800 - Manual (Page 230)

En_03
206
t
❚❚Interrupting Interval Timer Photography
Interval timer shooting will end automatically if the battery is
exhausted. Interval timer photography can also be ended by:
• Selecting Start > Off in the interval timer menu
• Performing a two button reset (
0 193)
• Resetting settings for the current shooting menu bank using the
Shooting menu bank item in the shooting menu ( 0 270)
• Changing bracketing settings ( 0 132)
• Terminating HDR ( 0 176) or multiple exposure shooting (0 195)
Normal shooting will resume when interval timer photography ends.
❚❚No Photograph
The camera will skip the current interval if any of the following
situations persist for eight seconds or more after the interval was
due to start: the photograph or photographs for the previous
interval have yet to be taken, the memory buffer is full, or the
camera is unable to focus in AF-S (note that the camera focuses again
before each shot). Shooting will resume with the next interval.
A
Release Mode
Regardless of the release mode selected, the camera will take the
specified number of shots at each interval. In C
H
(continuous high
speed) mode, photographs will be taken at the rate given on page 104.
In S (single frame) and C
L
(continuous low-speed) modes, photographs
will be taken at the rate chosen for Custom Setting d2 (CL mode
shooting speed,
0 293) in mode J, camera noise will be reduced.
A
Shooting Menu Banks
Changes to interval timer settings apply to all shooting menu banks
(
0 269). If shooting menu settings are reset using the Shooting menu
bank item in the shooting menu ( 0 270), interval timer settings will be
reset as follows:
• Choose start time: Now
• Interval: 00:01':00"
• Number of intervals: 1
• Number of shots: 1
• Start shooting: Off