Nikon D3 - Manual (Page 79)

53
s
5
Choose single-servo
autofocus.
S (single-servo autofocus) is
selected at shipment. If
another focus mode has been
selected, rotate the focus-
mode selector until it clicks
into place pointing to S (single-
servo autofocus). At this setting, the camera will automatically
focus on the subject in the selected focus point when the
shutter-release button is pressed halfway. Pictures can only be
taken when the camera is in focus.
6
Choose matrix metering.
a (matrix metering) is selected
at shipment. If another option
has been selected, press the
metering selector lock button
and rotate the metering
selector to a. Matrix metering
uses information from the
1,005-segment RGB sensor to
ensure optimal results for the
entire frame.
Focus-mode
selector
Metering selector