A56), Finish shooting – Nikon COOLPIX-P100 User Manual

Page 68

Taking Pictures of Smiling Faces (Smart Portrait Mode)

More on

Sh
oot

Finish shooting.

• To finish automatic shooting of smiling faces, either turn the camera off, set Smile

timer to Off, or rotate the mode dial to select another shooting mode.

Notes on Smart Portrait Mode

• Digital zoom is not available.
• Under some shooting conditions, faces and smiling faces may not be detected properly.
• See “Notes on Face Priority” (

A92) for more information.

Notes on Skin Softening

• When taking pictures with skin softening, the time required to save the pictures increases slightly.
• Depending on shooting conditions, even if the camera detects a face on the monitor at the time

of shooting, effects of the skin softening function may not be visible, and areas other than the face
may be processed. If the desired effect is not achieved, set Skin softening to Off and shoot again.

• The extent of skin softening effect that is applied cannot be set while using the Portrait or Night

portrait scene modes.

• Skin softening can also be applied to pictures after they have been taken (

A122).

Auto Power Off When Using Smile Timer (Standby Mode)

When Smile timer is set to On, the auto off function (

A165) will turn the camera off in the following

situations if no operations are performed.
• The camera is unable to detect any face.
• The camera has detected one or more faces, but is unable to detect a smiling face.

Functions Available in Smart Portrait Mode

• Flash mode is disabled when Blink proof is set to On. Flash mode (

A34) will be changed to U

(auto) when Blink proof is set to Off (other settings can be selected).

• Exposure compensation (

A41) can be adjusted.

• If Smile timer is set to Off, self-timer (

A37) can be set.

• The focus mode is fixed to A (autofocus).
• If you press the

d button to display the F (smart portrait) menu, you can change the settings

for Image quality, Image size, Skin softening, Smile timer, or Blink proof.

More Information

See “Autofocus” (

A31) for more information.