Nikon COOLPIX-P100 - Manual (Page 173)

161
Setup Menu
B
asi
c C
am
e
ra S
e
tup
B
Notes on Vibration Reduction
• It may take a few seconds to activate vibration reduction after the power is turned on or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
• When the camera shake is extremely high or low, picture compensation with electronic VR may not
be possible even when On (hybrid) is set.
• When the shutter speed is fast or extremely slow, electronic VR may not operate even when On
(hybrid) is set.
• When electronic VR in On (hybrid) operates, saving the picture takes longer than normal, because
when the picture is shot, the shutter is released twice automatically to perform picture
compensation. Shutter sound (
A165) only sounds once. Only one frame is recorded.