Nikon 5400 - Manual (Page 148)

136
The Setup Menu
Menu Guide
Release Speed
The image from the camera’s image sensor (CCD)
must be processed before it can be displayed in
the camera monitor, creating a slight display lag.
In P, S, A, and M modes, this option can be used
to minimize the delay between the shutter-re-
lease button being pressed and the picture being
taken, at the cost of a slight drop in the quality of
the preview image displayed in the monitor.
SHUTTER RELEASE SPEED
Normal
Quick response
Option Description
Quick
response
Reduces lag between shutter-release button being pressed and shutter
being released in P, S, A, and M modes.
* Horizontal lines may appear
when view through lens is previewed in monitor; this has no effect on
pictures taken at this setting. This setting does not take effect in
,
, and movie modes.
Normal Priority given to quality of preview image displayed in monitor.
* If the shutter-release button is pressed all the way down to take a picture during
“keep or delete” ( 75), the focus, exposure, and auto white-balance settings used
in the previous shot will apply to the new picture. To ensure a quick response, the
built-in Speedlight will not fi re if a picture is taken during “keep or delete”; optional
Speedlights will not fi re if Continuous is set to Single.
Monitor Options
The options in this menu control the quality of
the preview displayed in the monitor, the condi-
tions under which the monitor will turn on auto-
matically, and monitor brightness and hue.
Release speed
Display mode
Brightness
Hue
MONITOR OPTIONS