Nikon 5400 - Manual (Page 122)

110
The Shooting Menu
Menu Guide
Autoexposure Bracketing
When Auto bracketing is selected, exposure
varies with each shot; the number of shots and
amount of exposure compensation performed
are selected from the sub-menu shown at right.
Values are added to the exposure compensa-
tion value selected with the
button ( 36).
Bracketing is performed by varying shutter speed
(A and M modes), aperture (S mode), or shutter
speed and aperture (P mode).
3,
±0.3
3,
±0.7
3,
±1.0
5,
±0.3
5,
±0.7
5,
±1.0
AUTO BRACKETING
Option
3, ±1.0
3, ±0.7
3, ±0.3
5, ±1.0
5, ±0.7
5, ±0.3
No. of shots Exposure increment
0, +0.7, +0.3, –0.3, –0.7
0, +1.3, +0.7, –0.7, –1.3
0, +2.0, +1.0, –1.0, –2.0
0, +0.3, –0.3
0, +0.7, –0.7
0, +1.0, –1.0
Bracketing order
± 1
3
EV
± 2
3
EV
±1 EV
± 1
3
EV
± 2
3
EV
±1 EV
3
5
5
5
3
3
After taking a series of shots using bracketing, you can view the results in
quick review (
74) or playback ( 75) and select the pictures with the de-
sired exposure, discarding the remaining shots if so desired.
Continuous Shooting (Autoexposure Bracketing)
At settings of Continuous H and Continuous L ( 63), shooting will pause after
each bracketing cycle is complete.
Auto Flash and Auto ISO (Autoexposure Bracketing)
In auto fl ash mode ( 32), the fl ash setting for the fi rst shot in each bracketing cycle
applies to the remaining pictures. If the fl ash fi res on the fi rst shot, it will fi re for the
remaining shots; if the fl ash does not fi re on the fi rst shot, it will not fi re for the remain-
ing shots. If sensitivity (ISO equivalency) is set to Auto (
58), the sensitivity value for
the fi rst shot in each bracketing cycle will also apply to the remaining pictures.