Nikon SF-100 Slide Feeder Adapter LS-1000 - Manual (Page 17)

- 17 -
4.5 What to Do If a Mounted Slide is
Jammed
If a slide is jammed inside the auto slide feeder, remove it as
described below.
What to do if a jam occurs
1. Open the magazine cover.
2. Grip the mounted slide with your fingers or tweezers and
remove from the magazine. Be careful not to damage the
slide or the SF-100.
If a jam occurs between the slide autofeeder and the
LS-1000
1. Switch the power off after terminating scan operation of the
LS-1000.
2. Remove the binder and remove the auto slide feeder from
the LS-1000.
3. Grip the jammed mounted slide with your fingers or
tweezers from the slot in the LS-1000 or from the slide
autofeeder. Be careful not to damage the slide or the SF-
100.