Savin 4800WD - Manual (Page 25)

Placing Originals
15
1
Placing Originals
Note
❒ Place the original after any correc-
tion fluid or ink has completely
dried. Not taking this precaution
will result in a dirtied exposure
glass and blemished copies.
❒ Dust and residue from pencil-drawn
originals can result in a dirtied ex-
posure glass and blemished cop-
ies. We recommend using the
carrier sheet for this type of origi-
nal. See p.18 “Setting the Carrier
Sheet”.
❒ If the original's rear edge is badly
curled, smooth it out with both
hands before scanning. If the origi-
nal is inserted as is, it may be dam-
aged.
❒ When copying curled originals, use
the front copy output auxiliary
tray.
Reference
For details about precautions for
originals, see p.12 “Originals”.
AAAA
Adjust the original guides to the
size and orientation of the origi-
nal width.
Note
❒ Make sure the original guides
are flush against the original.
❒ Do not push the original guide
side fence with force.
BBBB
Using both hands, carefully insert
the original between the original
guides, copy side up.
Important
❒ Once originals start to feed in,
do not push or pull them. This
may damage them.
❒ Do not operate the document
roller while originals are being
fed through the machine. Origi-
nals may be damaged.
Note
❒ Do not release your hands until
the original is pulled in. Release
when it has gone slightly in.
❒ You can change the original
feed delay setting if originals
are repeatedly feeding in slant-
ed, or if you need to adjust the
delay for the type of originals
you are using. See “Original
Feed Delay 1”, General Settings
Guide.
❒ If the leading edge of the origi-
nal is badly curled, smooth out
the curl, and then place the orig-
inal in the insertion area. ZEDH190E
ZEDH180E
DolphinC2_ENcopy_F_FM.book Page 15 Friday, February 25, 2005 10:46 AM