Aastra Telecom 53I - Manual (Page 82)

Sylantro Interoperability Features
76 RN-001029-00, Rev 03, Release 2.1
IP Phone Release Notes 2.1
Configuring ACD Auto-Available Timer Using Configuration Files
You use the following parameters to configure an ACD auto-configuration timer
in the configuration files:
• acd auto available
• acd auto available timer
Parameter –
acd auto available
Auto Available
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, .cfg
Description Enables the ACD timer to automatically reset the IP phone status to
“available.” Set to 0 = Off, Set to 1 = On
Format Binary
Default Value 0 (disable)
Range 0 (disable)
1 (enable)
Example acd auto available: 1
Parameters –
acd auto available timer
Auto Available Timer
(in Web UI)
Aastra Web UI Basic Settings->Preferences->
Auto Call Distribution Settings
Configuration Files aastra.cfg, .cfg
Description Specifies the length of time, in seconds, before the IP phone status
switches back to “available.”
Format integer
Default Value 60 (seconds)
Range 0 to 120 (seconds)
Example () acd auto available timer: 60