Allied Telesis AT-MC1005/4 - Manual (Page 33)

AT-MC1004 and AT-MC1005/x Series Installation Guide
23
1 RFI Emission EN55022 Class B
2 Warning: In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate
measures.
3 Immunity EN55024
4 Electrical Safety EN60950, UL1950, CSA 950
5 Laser EN60825
Safety
6 Warning: Class 1 Laser product.
7 Warning: Do not stare into the laser beam.
8 Electrical Notices
Warning: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock, do not remove the cover. No user-serviceable
parts inside. This unit contains HAZARDOUS VOLTAGES and should only
be opened by a trained and qualified technician. To avoid the possibility of
ELECTRIC SHOCK, disconnect electric power to the product before
connecting or disconnecting the LAN cables.
9 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
10 Caution: Power cord is used as a disconnection device. to de-energize
equipment, disconnect the power cord.
11 Pluggable equipment, the socket outlet shall be installed near the
equipment and shall be easily accessible.
12 Caution: Air vents must not be blocked and must have free access to the
room ambient air for cooling.
13 Operating Temperature: This product is designed for a maximum
ambient temperature of 40° degrees C.
14 All Countries: Install product in accordance with local and National
Electrical Codes.