Allied Telesis AT-WCU200G - Manual (Page 43)

AT-WCU200G User’s Guide
29
3. If no IP address is displayed, click Renew to assign an IP address to
your computer from the DHCP server.
Note
Click Release to release an assigned an IP address to the DHCP
server.
Displaying Version Information
To display the information about the software, perform the following
procedure:
1. To access the Version Information Screen, click on Version
Information in the side bar of the Wireless Client Manager page.
The Version Information screen is displayed. See Figure 21.
Figure 21 Version Information Screen