Allied Telesis AT-WCU200G - Manual (Page 39)

AT-WCU200G User’s Guide
25
— PEAP: Indicates Protected Extensible Authentication
Protocol. Once you select PEAP, click Configuration.
Then enter a User Name and Password. Click OK.
❑ Pre-shared key: This field only appears when you configure the
Authentication Mode field as WPA-PSK. Enter a pre-shared key in
ASCII format. This value can be a minimum of 8 characters and a
maximum of 63 characters in length.
5. Click Apply.
Configuring Advanced Settings
To configure the advanced settings on the AT-WCU200G wireless
adapter, perform the following procedure.
1. Click the following icon at the bottom right hand corner of your
screen.
The Allied Telesyn Wireless Client Manager screen is displayed with
the General Tab selected. See Figure 15 on page 13.
2. Click Configuration in the sidebar.
3. Click Advanced in the sidebar.
The Advance Tab is displayed. See Figure 19 on page 26.