Allied Telesis AT-WCU200G - Manual (Page 30)

16
Configuring the
Wireless Client
Manager
Settings
You can use the Wireless Client Manager to customize your wireless
connections settings. This section provides descriptions of the following
Tabs:
❑ Status
❑ Site Survey
❑ Configuration
❑ Host Information
❑ Version Information
To access the Allied Telesyn AT-WCU200G Wireless Client Manager,
perform the following procedure:
1. Click the following icon at the bottom right hand corner of your
screen.
The Allied Telesyn Wireless Client Manager screen is displayed with
the Status Tab selected. See Figure 15 on page 13.
Note
If the AT-WCU200G Wireless Configuration utility icon does not
appear in the system tray, do one of the following:
- Double-click the desktop AT-WCU200G Wireless Configuration
utility icon.
- Select Start, Programs, Allied Telesyn AT-WCU200G Wireless
Utility, and AT-WCU200G Wireless Configuration Utility.
2. See the following sections for configuration information regarding
the Tabs.