Allied Telesis AT-WCU200G - Manual (Page 18)

4
Before you Install
This section describes what to do before you install the AT-WCU200G
wireless adapter. It includes:
❑
Package Contents on page 4
❑
System Requirements on page 4
Package
Contents
Open the AT-WCU200G wireless adapter box and unpack it carefully. The
box contains the following items:
❑ One AT-WCU200G wireless adapter
❑ One USB extension cable
❑ One CD-ROM
❑ One copy of this manual (on the CD ROM)
If any item is found missing or damaged, please contact your local
reseller for replacement.
System
Requirements
Before you install an AT-WCU200G wireless adapter, make sure your PC
has the following components:
❑ An USB port
❑ The Windows 98SE/ME/200/XP Operating System
❑ A CD ROM drive
The CD ROM drive is required for software installation.
Note
An USB 2.0 port is required to operate the AT-WCU200G wireless
adapter at date rates of 54Mbps operation and below. An USB 1.1
port delivers at data rates of 11Mbps and below.