Allied Telesis AT-S82 - Manual (Page 24)

Chapter 2: Basic Switch Parameters
24
Resetting the Switch and Retaining the IP Address
There are two options for resetting the switch: resetting all the parameters
except the IP address, or resetting the switch to return all the parameters
to their default values. The procedure for resetting the switch to the default
values is described in “Returning the AT-S82 Management Software to the
Factory Default Values” on page 25.
To reset the switch and retain the IP address, perform the following
procedure:
1. From the main menu, select Reset.
The Reset page is shown in Figure 6.
Figure 7. Reset Page
2. Click Apply.
The switch is reset.