Allied Telesis AT-S82 - Manual (Page 19)

AT-S82 Management Software User’s Guide
19
BOOTP - Enables BOOTP so that the switch gets its IP address from a
BOOTP server. When you choose this selection, the IP Address,
Subnet Mask, and Default Gateway fields are not available.
DHCP - Enables DHCP so that the switch gets its IP address from a
DHCP server. When you choose this selection, the IP Address, Subnet
Mask, and Default Gateway fields are not available.
3. Click Apply to implement your changes.
4. To save the settings to the configuration file, from the main menu,
select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 14.
5. Click Apply.