Allied Telesis AT-FS717FC/SC - Manual (Page 43)

AT-FS717FC/SC Fast Ethernet Switch Installation Guide
43
RJ-45 Twisted Pair Port Connectors
This section lists the connectors and connector pinouts for the
AT-FS717FC/SC Fast Ethernet switch and its components.
Figure 19 illustrates the pin layout to an RJ-45 connector and port.
Figure 19. RJ-45 Connector and Port Pin Layout
Table 3 lists the RJ-45 pin signals when a twisted pair port is operating in
the MDI configuration.
Table 4 lists the RJ-45 port pin signals when a twisted pair port is
operating in the MDI-X configuration.
Table 3. MDI Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
Table 4. MDI-X Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 RX+
2 RX-
3 TX+
6 TX-
8
8
1 1