Allied Telesis AT-FS717FC/SC - Manual (Page 21)

AT-FS717FC/SC Fast Ethernet Switch Installation Guide
21
Network Topologies
The AT-FS717FC/SC switch can be used in a variety of network
topologies, such as a stand alone, Ethernet hub, and backbone. Each type
of topologies is described below.
Standalone
Topology
Figure 3 illustrates the Standalone topology where each end-node is
connected directly to a 10/100Base-TX port on an AT-FS717FC/SC
switch. This gives each end-node a dedicated 10 Mbps or 100 Mbps link.
Figure 3. Standalone Topology
1070
Workstations
Workstations Server
10 Mbps
100 Mbps
AT-FS717FC/SC