Allied Telesis AT-2911 Series Adapters - Manual (Page 98)

Chapter 4: Installing the Driver Software
98
2. In the Device Manager window, right-click the device you wish to
update. It may be listed as Allied Telesis AT-2911xx Gigabit Fiber
Ethernet or as a Broadcom Device.
The shortcut menu appears as shown in Figure 58.
Figure 58. Network Adapters on Windows Server 2003 & XP
3. Select Update Driver.
The Hardware Update Wizard window pops up as shown in Figure 53
on page 93.
4. Select No, not this time.
5. Click Next.
The Hardware Update Wizard prompts you to select one of two
options as shown in Figure 54 on page 94.
6. Select Install from a list or specific location (Advanced).
7. Click Next.
The Hardware Update Wizard prompts you to specify the location of
your driver software as shown in Figure 55 on page 95.
8. Specify the location of the driver software that you downloaded from
Allied Telesis website.
9. Click Next.