Allied Telesis AT-2911 Series Adapters - Manual (Page 68)

Chapter 3: Modifying Advanced Properties
68
RSS Queues
The RSS Queues feature allocates queue space between the adapter and
processor, and allows you to specify the number of RSS queues that the
adapter assigns receiving data to.
To Specify the RSS Queues value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 43.
2. Select RSS Queues in the Property box.
The RSS Queues page is displayed as shown in Figure 33.
Figure 33. RSS Queues Page
3. Select one of the following options:
Note
The supported number of RSS queues and default setting depend
on the adapter and operating system. You might not see all options
listed below.
 RSS 4 Queues— The system allocates four RSS queues.
 RSS 1 Queue— The system allocates one RSS queue.