Allied Telesis AT-2911 Series Adapters - Manual (Page 42)

Chapter 3: Modifying Advanced Properties
42
Overview
To modify the advanced properties of the AT-2911 adapter, you must
access Device Manager on your operating system, then go to each
advanced property page.
Guidelines
Here are the guidelines to modifying the advanced properties:
 To change the advanced property settings, you must have
Administrator privileges.
 When you upgrade the driver software, the settings of the
advanced properties may change. Verify the settings after
upgrading the driver software.
Twisted pair
copper port
In addition to the advanced properties listed on page 41, twisted pair
copper ports have the following properties:
 Wake Up Capabilities
 WOL Speed
Wake Up Capabilities
The Wake Up Capabilities property enables the network adapter to wake
up from a low-power mode when it receives a network wake-up frame.
Two types of wake-up frames are available: Magic Packet and Wake Up
Frame.
WOL Speed
The WOL Speed property allows you to set the speed at which the adapter
connects to a network while the adapter is in the Wake on LAN (WOL)
mode.