Allied Telesis AT-2911 Series Adapters - Manual (Page 26)

Chapter 1: Overview
26
For more information about SNMP and how to install SNMP subagent and
BACS, see the Broadcom NetXtreme® 57XX User Guide. To view the
document, see “Broadcom Documentation” on page 26.
User Diagnostics
The Broadcom User Diagnostics utility is an MS-DOS based application
that allows you to run a series of diagnostic tests on the AT-2911 series
adapters.
To run the user diagnostics, you must install the Broadcom user
diagnostics utility. Download the user diagnostics utility on the Allied
Telesis website as described in “Installing Broadcom Utilities,” next.
For more information about the Broadcom User Diagnostics utility, see the
Broadcom NetXtreme® 57XX User Guide. To view the document, see
“Broadcom Documentation” on page 26.
Installing
Broadcom
Utilities
To download Broadcom utilities, do the following:
1. Open a web browser, such as Internet Explorer or FireFox, on your
system and enter the following:
http://www.alliedtelesis.com/support/software
The Allied Telesis Software Download page is displayed.
2. Enter “2911” in the search box and press the enter key.
3. Select the Broadcom Management Applications Installer or User
Diagnostics.
4. Save the zip folder onto your system.
Broadcom
Documentation
You can view more detailed information for the following features and
topics for the AT-2911 series adapter in the Broadcom NetXtreme® 57XX
User Guide including;
 Introduction - Teaming
 Introduction - Manageability
 Installing Linux Driver Software
 Installing Management Applications
 Configure Teaming (Windows)
 Using Broadcom Advance Control Suite
 User diagnostics.
To access this document, click on the following link:
www.broadcom.com/docs/support/ethernet_nic/
Broadcom_NetXtreme_Server_15.pdf.