Allied Telesis AT-2911 Series Adapters - Manual (Page 66)

Chapter 3: Modifying Advanced Properties
66
Receive Buffers
The Receive Buffers property specifies the number of receive buffers
allocated for the adapter. Increasing this value may enhance performance
in receiving traffic, but consumes more system memory.
To change the Receive Buffers value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 43.
2. Select Receive Buffers in the Property box.
The Receive Buffers page is displayed as shown in Figure 31.
Figure 31. Receive Buffers Page
3. Select one of the following options:
 Default— Specifies the default number of receive buffers allocated
to the adapter. This is the default setting.
 Maximum— Specifies the maximum number of receive buffers
allocated to the adapter.
 Minimum— Specifies the minimum number of receive buffers
allocated to the adapter.
4. Click OK.