Allied Telesis AT-IFS802SP - Manual (Page 55)

51 AT-IFS802SP-80 User Manual
Pull down the selection item and focus on • Port Based then press to set the VLAN
Operation Mode in Port Based mode.
Click to add a new VLAN group (The maximum VLAN groups are up to 64). •
VLAN – Port Based interface
Add
Apply
Enter the group name and VLAN ID. Add the selected port number into the right field to •
group these members to be a VLAN group, or remove any of them listed in the right field
from the VLAN.
And then, click to have the configuration take effect.
•
You will see the VLAN list displays. •
VLAN—Port Based Add interface
Apply