Allied Telesis AT-IFS802SP - Manual (Page 49)

45 AT-IFS802SP-80 User Manual
Assigning 2 ports to a trunk group with LACP disabled
Static Trunking Group information
LACP enabled •
Having set up the aggregator setting with LACP enabled, you will see the trunking group
information between two switches on the tab of
Aggregator Information.
Switch 1 configuration
Set 1. System Priority of the trunk group. The default is 1.
Select a 2. trunk group ID by pull down the drop-down menu bar.
Enable LACP. 3.
Include the member ports by clicking the 4. Add button after selecting the port number and
the column field of Work Ports changes automatically.
Switch 1 configuration interface
Aggregation Information of Switch 1
5. Click on the tab of Aggregator Information to check the trunked group information as
the illustration shown above after the two switches configured.