Allied Telesis AT-IFS802SP - Manual (Page 18)

14 AT-IFS802SP-80 User Manual
3.2 DIN-Rail Mounting
The DIN-Rail is screwed on the industrial switch when out of factory. If the DIN-Rail is not screwed
on the industrial switch, please see the following pictures to screw the DIN-Rail on the switch. Follow
the steps below to hang the industrial switch.
1. First, insert the top of DIN-Rail into the track. 2. Then, lightly push the DIN-Rail into the track.
3. Check if the DIN-Rail is tightened on the track or not.
4. To remove the industrial switch from the track, reverse above steps.