Allied Telesis AT-GS950/10PS - Manual (Page 374)

Appendix B: AT-GS950/10PS Default Parameters
374
Restricted Role False True/False
Restricted TCN False True/False
Port State Ignore Enable/Disable/Ignore
Bridge/Trunk Config/Trunking
Trunk Status Disabled Active/Passive/Manual/Disabled
Bridge/Trunk Config/LACP Group Status
System Priority 32768 32768
System ID MAC Address of
AT-GS950/10PS switch -
Port Priority 0 0 - 255
Bridge/Mirroring
Mirroring Status Disabled Enabled/Disabled
Mirroring Port -
All, 1 - 10
Ingress Mirrored Port
All, 1 - 10 All, 1 - 10
Egress Mirrored Port
All, 1 - 10 All, 1 - 10
Bridge/Loopback Detection
State Disabled Enabled/Disabled
Interval 2 seconds 1 - 32767 seconds
Recover Time 60 seconds 0 or 60 - 1000000
Port
All, 1 - 10
-
Loopback Detection
State Disabled Enabled/Disabled
Table 12. AT-S110 Management Software Default Settings (Continued)
Parameter
AT-GS950/10PS
Default Setting
Specifications