Allied Telesis AT-GS950/10PS - Manual (Page 240)

Chapter 18: Access Control Configuration
240
Figure 92. Example of Policy Entry
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.
Modify Policy
To modify a Policy entry, perform the following procedure:
Note
Before you can modify an entry, you must first enter a Policy - see
“Create Policy” on page 238.
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select Policy.
An example of the Create Policy page with a Policy table entry is
shown in Figure 92.
3. Select the table entry that you want to modify and click the Modify link
in the Action column.
The Modify Policy page is displayed. See Figure 93 on page 241.