Allied Telesis AT-GS950/10PS - Manual (Page 277)

AT-GS950/10PS Switch Web Interface User’s Guide
277
Figure 110. Dial-In User Page
3. In the User Name field, type a name for the user.
4. In the Password field, type a password for the user.
5. In the Dynamic VLAN field, enter the VID of the VLAN which you will
allow the user to access. If you enter 0, this field will be ignored.
6. Click the Add button.
The Dial-in User page is refreshed. See Figure 111.
Figure 111. Dial-In User Page Example
7. To permanently save these settings in the configuration file, select
Save Configuration to Flash from the main menu to permanently
save your changes.
Modify a Dial-in User
To modify the settings for a dial-in user, do the following:
1. From the main menu on the left side of the page, select the Security
folder.
The Security folder expands.
2. From the Security folder, Dial-in User.