beautypg.com

Figure 4. securing the adapter card – Allied Telesis AT-2900 Series Adapters User Manual

Page 28

background image

Chapter 2: Installing the Hardware

28

Figure 4. Securing the Adapter Card

7. Replace the system’s cover and secure it with the screws removed in

Step 2.

8. Disconnect any personal antistatic devices.

9. Power the system on.

Note

If you installed the adapter card in a Microsoft Windows Operating
system before installing the driver software, the Found New
Hardware Wizard launches automatically. For more information,
refer to the chapter for your Windows Operating system.

Once the system returns to proper operation, the adapter hardware is fully
installed. Next, connect the network cables. See “Connecting the Network
Cables” on page 29
.