Allied Telesis AT-2900 Series Adapters - Manual (Page 131)

AT-2900 Series Gigabit Ethernet Network Adapters Installation Guide
131
/* 69 */ "Slot error, expected an UUT to be found at
location %02X:%02X:00",
/* 70 */ "Adjacent memory has been corrupted while testing
block 0x%08x-0x%08x\nGot 0x%08x @ address 0x%08x. Expected
0x%08x",
/* 71 */ "The function is not Supported in this chip",
/* 72 */ "Packets received with CRC error",
/* 73 */ "MII error bits set: %04x",
/* 74 */ "CPU does not initialize MAC address register
correctly",
/* 75 */ "Invalid firmware file format",
/* 76 */ "Resetting TX CPU Failed",
/* 77 */ "Resetting RX CPU Failed",
/* 78 */ "Invalid MAC address",
/* 79 */ "Mac address registers are not initialized
correctly",
/* 80 */ "EEPROM Bootstrap checksum error",