Allied Telesis AT-GS950/48 - Manual (Page 17)

AT-GS950/8, AT-GS950/16, AT-GS950/24 and AT-GS950/48 Switches Installation Guide
17
The AC power plug is in the same location for each of the switches and is
illustrated in Figure 2.
Figure 2. Back Panel
Management Software
The switches come with the management software pre-installed. Although
the three models have the same features, each has a different
management software program. The programs are:
❒ AT-S113 Management Software for the AT-GS950/8
Switch
❒ AT-S114 Management Software for the AT-GS950/16
Switch
❒ AT-S115 Management Software for the AT-GS950/24
Switch
❒ AT-S116 Management Software for the AT-GS950/48
Switch
In the unlikely event that the management software becomes corrupted or
damaged, you can download the software from the Allied Telesis
corporate web site and reinstall it on the switch. You may also want to
periodically visit the Allied Telesis corporate web site to see if new
versions of the software have been released. For instructions to install new
management software, refer to the AT-S107, AT-S108, AT-S109 or AT-
S116 Management Software User’s Guide.
Twisted Pair Ports
The AT-GS950/8, AT-GS950/16, AT-GS950/24 and AT-GS950/48
switches feature 8, 16, 24 and 48 twisted pair ports, respectively. All four
models are 10Base-T, 100Base-TX, and 1000Base-TX compliant. The
port speeds and duplex modes may be set automatically with IEEE 802.3u
Auto-Negotiation or manually with the management software.
The twisted pair ports feature 8-pin RJ-45 connectors. For the port pinouts,
refer to “Connectors and Port Pinouts” on page 50.