Allied Telesis AT-GS924M - Manual (Page 16)

Chapter 1: Overview
16
Features
Here are the hardware features of the AT-GS900M Series Gigabit
Ethernet Switches.
Twisted-Pair
Ports
Here are the basic features of the 10/100/1000 Mbps twisted-pair ports:
 8, 16, or 24 ports per switch
 10Base-TX, 100Base-T and 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x Flow Control in 10/100Base-TX full-duplex operation
 IEEE 802.3x Back Pressure in 10/100Base-TX half-duplex
operation
 IEEE803.3z 1000Base-T Flow Control
 RJ-45 connectors
SFP Slots All three switches support both 100Base-FX and 1000Base-SX/LX
transceivers. The switches support slots for SFPs as follows:
 One SFP slot on the AT-GS908M switch
 Two SFP slots on the AT-GS916M switch
 Four SFP slots on the AT-GS924M switch
Note
The AT-GS916M and AT-GS924M SFP slots are paired with
twisted-pair ports on the switch to form combo ports. For more
information, see “Combo Ports” on page 22.
Note
You must purchase SFP transceivers separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Note
See the product data sheets for the specific ATI SFP modules
supported by the AT-GS900M Series switches.