Atlantis Land Mistral Lan Router ISDN - Manual (Page 46)

show config
Description: A concise summary of the router configuration is displayed.
Example:
Router> show config
IP Addr: 192.168.168.230 NetMask: 255.255.255.0 IP RIP: D
Port 1: ISDN PPP ENABLED Europe (ETSI)
Ewan : EWAN ENABLED Speed = 10 Mb
show connection log
Description: The connection log is displayed by the system. Up to 128 entries are maintained by the
router in wraparound fashion. For a complete description of these entries, refer the User Guide for
your system.
Example:
Router> show connection log
1 9/14/99 22:15:38 N/A(N/A): Triggered Detail: IP/TCP 192.168.168.240->63.192.
151.44 1905->139
2 9/14/99 22:16:28 Modem 3(Office): Connected Detail: Outgoing Call to 14085553456
show interface list
Description: This command displays the status of all interfaces in the system, including their
encryption status.
Router> show interface list
Oper. IP BRG Co
IfName Type State MTU Status Status Status
-------------------------------------------------------------------
lo LOOPBACK Up 1536 Enable Disable n/a
lan ETHERNET Up 1500 Enable Enable n/a
show internet access time
Description: The current setting of the Internet time restriction is displayed. See set internet access time for details.
Example:
Router> show internet access time
Day-of-the-week : Mon-Sat
Time-of-day : 13:30- 5:00
show system
Description: This command displays system and SNMP related configuration. All of them can be
changed through individual commands, except for the S/W and H/W version numbers that are constant
for each version of the product.