Enable profile Page 37: Πexample 2
Page 37: Πexample 2
enable profile
The state of the specified profile is set to “enabled”. Only enabled profiles are available for use. A
profile’s state is set by default to enabled when it is created.
show profile
This command displays a summary of all configured static profiles.
Example:
Router> show profile
Profile
Admin
Remote Call
Name
Type
State
Number Originator
----------------------------------------------------------------
wilson
EWAN
Enabled
daniel
ISDN
Enabled
5553333
Local
only
julia
ISDN
Enabled
5556666
Local
only
show profile
Description: The details of a configured static profile are displayed.
Example 1:
Router> show profile wilson
Profile type:
ISDN Admin. State:
Enabled
Call Originator:
Local only Remote DN:
5553333
Data Service:
Autodetect Clid Auth:
No
Call Back:
No
Call Back #:
PPP Oper. State:
Down
Max Receive Unit :
1524
My Account Name :
user-name
Remote Account Name:
Send Auth. Type:
Either
Recv Auth. Type:
None
TCP/IP VJ Compression:
Disabled Inactivity Timeout: 120
Multilink Type:
Overflow Second Dial Number:
Second Caller ID:
Second Callback Number:
Upper Threshold:
85
Lower Threshold:
45
π
Example 2:
Router> show profile wilson
Profile type:
EWAN
Admin. State:
Enabled
Encapsulation:
Ethernet
MAC Address:
90-00-12-34-56-79
Oper. State:
Down
Max Receive Unit: 1500
System Name:
Local Router