Atlantis Land Mistral Lan Router ISDN - Manual (Page 31)

Example:
Router> show pat
Public Port Private IP Private Port
Number Address Number
--------------------------------------------------------
Default 192.168.168.121
123 192.168.168.120 234
26 192.168.168.120 26
Router>
show tcp statistics
Example:
Router> show tcp statistics
Received Sent
-----------------------------------------------------
Total Packets 0 0
show udp statistics
Example:
Router> show udp statistics
Received Delivered
----------------------------------------------------------
Total datagrams 19368 5424
Datagrams with checksum error 0
Datagrams with incorrect length 0
Datagrams dropped due to buffer full 1133
Datagrams with dest. port unreachable 0
Port Commands
Port related commands allow configuration of a port, the protocol running on the port, and the
corresponding protocol parameters. In addition, commands are available for clearing statistical
counters, enabling/disabling ports, and displaying port configuration and statistics.
There are two modes of operation when setting a port: (1) the advanced mode, which causes detailed
prompts to be displayed, allowing the user to configure all parameters, (2) the express mode, which
assumes default values for most parameters, and therefore causes a minimal number of prompts to
show. The system will come up in the express mode. Typing a Ctrl-E (^E, i.e., pressing both the E and
control key together) will cause the mode to be toggled.
clear port statistics [port name]
Description: This command clears port statistics. If a port is not specified, the statistics counters on all
ports are cleared.