Atlantis Land Mistral Lan Router ISDN - Manual (Page 28)

This example assigns IP addresses to the two sides of the PPP connection ppp2 204.71.220.153 is for
the local side of ppp2, while 204.71.220.151 is for the remote side; both use the same network mask,
255.255.255.0.
Router> set ip ppp2 204.71.220.153 255.255.255.0 204.71.220.151
Example 2:
This command activates IP routing over the ISDN connection profile isdnprofile1. When a connection
is set up using profile isdnprofile1, unnumbered IP routing will be turned on. (Refer to the section
“Profile Commands”)
Router> set ip isdnprofile1
show arp table
Description: This command displays the ARP (Address Resolution Protocol) cache table, which
contains up to 16 most recent MAC-to-IP-address mappings that have not been aged out.
Example:
Router> show arp table
110.0.0.1 at 00:60:20:00:00:15 permanent
110.0.0.2 at 00:40:33:3D:D5:DB
show icmp statistics
Description: This command displays statistical information associated with the Internet Control
Message Protocol (ICMP).
Example:
Router> show icmp statistics
Received Transmitted
------------------------------------------------------------
Dest Unreachable: 0 0
Time Exceeded: 0 0
IP Header Error: 0 0
Source Quench: 0 0
Redirect: 0 0
Echo Request: 0 0
Echo Reply: 0 0
Timestamp Request: 0 0
Timestamp Reply: 0 0
Address Mask Request: 0 0
Address Mask Reply: 0 0
Calls to icmp error: 0
Messages Reflected: 0