Samsung SGH-ZX10IBACIN - Manual (Page 143)

Section 8: Changing Your Settings 143
Connectivity
Sect
ion 8
Connecting with a PC
To use an infrared connection with your computer, you
must:
1. Configure and activate an IrDA-compliant infrared port
on the computer.
2. Activate the infrared feature on the phone.
3. Select an entry and press the Options soft key.
4. Use the Up or Down Navigation key to highlight Send
and press the Select soft key or the key.
5. Highlight Via Infrared.
Ensure that the IR ports of the sending and receiving
device are pointing at each other and that there are no
obstructions between the devices.
6. Press the Select soft key or the key. The entry is sent
to your computer.
Network Selection (SIM Dependent)
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
Connections
The Connections feature allows you to select and or edit
the profile containing the setting for connecting your
phone to the network. These settings are used for the WAP
Template.book Page 143 Wednesday, December 28, 2005 7:02 PM