Samsung SPH-M310ZKAVMU - Manual (Page 21)

Phone Usage 18
• Silence All, Vibrate, Ringtone off, 1-Beep, Levels 1-8.
2. If either Vibrate or Silence All is selected, the
Main screen displays the selected option.
Finding an Existing Phone Number
While viewing the Main screen, you can search your
Contacts entries for phone numbers that contain a
specific string of numbers. To find a phone number:
1. Enter three or more of the last digits
associated with the contact’s phone number.
(The more numbers you enter, the more
specific the search becomes.)
Note: You can store up to 98 numbers in your phone’s speed
dial and then access them by either pressing a button or
two.
2. Select Options (Right Option Button) ➔ Find. (All
matching Contacts entries display.)
3. Highlight the desired entry and press either
or Call (Left Option Button).
Speed Dialing
Ideal for frequently dialed numbers, this feature
allows you to dial entries in your contact list using the
keypad with only one or two key presses. You can
store up to 99 numbers in your phone’s speed dial
and then activate them by either pressing a button or
two. With this feature, you can dial speed dial entries
using one key press (for locations 2–9) or two key
presses (for locations 10–99). For more information,
refer to “Creating Speed Dial Assignments” on
page 36.
One Digit Speed Dialing (2 - 9)
ᮣ Press and hold the corresponding memory number
for more than 1 second. The display then confirms
what number was dialed by showing the name and
number of the outgoing speed dial call.
Two Digit Speed Dialing (10 - 99)
ᮣ Press and release the first digit, then press and
hold the second digit for more than 1 second. The
display then confirms what number was dialed by
showing the name and number of the outgoing
speed dial call.
Note: Location 1 is reserved for voicemail. Locations 2-99 are
unassigned. To assign a speed dial location, please see
page 36.
Speakerphone
The speakerphone feature lets you hear audio
through the speaker and talk without holding the
phone.
1. To activate the speakerphone while on a call,
press and hold . A “Speaker Mode On”
message displays on the screen.