Samsung HT-H7730WM-ZA - Manual (Page 17)

17
- English
Settings
4. A 6-step test will start. During each stage,
the TV will sound a test tone at a different
frequency. The tone will begin softly and
increase in volume. Select yes when you
can hear the test tone. If you want to
listen to it again, select No. Each time you
select Retry, the TV will move on to the
next tone. Once the test is complete, a
screen appears that lets you compare the
original sound to the calibrated sound.
5. Select Next, and then press the Ok button
to continue. The on-screen keyboard
appears with a default profile name.
6. Enter a name for the calibrated sound
profile or accept the default name, select
done, and then press the
Ok button.
7. Select done on the next screen, and
then press the Ok button. The Sound
Customizer screen reappears.
Custom Sound profile : Select a Sound Profile
you created to activate it. Or select Hearing
Impaired, a Custom Sound Profile especially
composed of large sounds for those with
hearing disorders.
✎ If there are more than 3 Custom Sounds
registered, Family mode will be activated
which is composed of the average value of all
registered profiles.
Add Custom Sound : Create and add a new
Custom Sound profile. See the instructions
above.
Edit Custom Sound : Choose a Custom Sound
profile to modify it. Follow the same steps
you used when creating a sound profile. This
function is only available if you have added
a Custom Sound profile using Add Custom
Sound. (See above.)
Manage Custom Sound : Rename or delete
Custom Sound Profiles. This function is only
available if you have added a Custom Sound
profile using Add Custom Sound. To select a
profile, highlight the check box to the right of
the profile, and then select Rename or delete.
Equalizer
Lets you configure the Equalizer settings
manually.
Smart volume
Lets you set the product so that the volume
remains stable when a scene change occurs or
when you change the channel.
Audio Return Channel (ARC)
Lets you direct the sound from the TV to the
Home Theater speakers. Requires an HDMI
connection and an Audio Return Channel (ARC)
compatible TV.
~ If Audio Return Channel is set to On and
you are using an HDMI cable to connect
the product to the TV, digital optical input is
disabled.
~ If Audio Return Channel is set to Auto and
you are using an HDMI cable to connect
the product to the TV, ARC or digital optical
input is selected automatically.
digital Output
Lets you set the digital Output to match the
capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
digital output selection table. (See page 55)
dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
Off: Leaves the dynamic range uncompressed,
letting you hear the original sound.
On: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the product
downmix to Normal Stereo or to Surround
Compatible.
Audio Sync
When the product is attached to a digital TV,
lets you adjust the audio delay so that the
audio syncs with the video. You can set the
delay between 0 and 300 milliseconds.
✎ The Auto function in Audio Sync is
guaranteed to work only with a Samsung
TV that supports the ARC function (the
Anynet+ function).