Samsung SCH-R560DAAMTR - Manual (Page 21)

Understanding Your Phone 18
– Enter the Phone Lock Code (usually the last four digits of the phone
number assigned to your Samsung Messager II). The Security menu
appears in the display.
– Select Lock Phone ➔ Lock. “Device lock mode set” appears in the
display, and you are returned to standby mode.
• To unlock the device:
– Press the Unlock soft key, You are prompted to enter the device lock
code (password).
– Enter the Lock Code (usually the last four digits of the phone number
assigned to your Samsung Messager II). You are returned to standby
mode.
Note: For more information, refer to “Lock Phone” on page 122.
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1. While in standby mode, enter a phone number, and press
to place a call.
2. Press to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
• View Now — This selection allows you to view the messages
now.
• View Later — This selection allows you to view the messages at a
later date.
ᮣ Highlight the desired viewing option and then press .
Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
to “In-Use Menu” on page 27.)
Speakerphone Mode
Lets you use your phone handsfree or to share a call with other
people nearby.
• To place your phone in Speakerphone Mode:
ᮣ Press and hold the Speakerphone key ( ) until
“Speakerphone On” appears in the display.
r560.book Page 18 Tuesday, June 16, 2009 1:04 PM