Samsung SC-D180-XAP - Manual (Page 82)

ENGLISH
78 78
Digital Still Camera mode
Inserting and removing the Memory Stick
● Inserting Memory Stick
1. Turn the Power switch to OFF.
2. Insert the Memory Stick into the Memory Stick slot located on the camcorder,
in the direction of the arrow.
● Removing the Memory Stick
1. Turn the Power switch to OFF.
2. Remove the Memory Stick by pushing the card in and letting it spring out.
✤ Do not attempt to pull the Memory Stick out without first pushing it in.
Notes
■ If you turn the power switch to M.PLAY, the last recorded image appears.
-
If there are no recorded images on the Memory Stick, NO STORED IMAGE!
and
will display on the screen.
■ Do not turn the power off while recording, loading, erasing or formatting.
■ Please turn the power off before you insert or remove the Memory Stick.
You could lose data on the Memory Stick.
■ Do not allow metal substances to come in contact with the terminals of the Memory Stick.
■ Do not bend, drop or apply strong shock to Memory Stick.
■ After pulling the card out from the camcorder, please keep the Memory Stick in
a soft case to prevent static shock.
■ The stored contents may be changed or lost as a result of misuse, static electricity,
electric noise or repair. Save important images separately.
■ Samsung is not responsible for data loss due to misuse.
■ If the USB cable is connected to the camcorder, the (DELETE), (S.SHOW),
(FWD), (REV) buttons are not available in M.PLAY mode.